Abrites USA - Abrites AVDI, Auto Key Programming
Add your custom HTML here

AVDI Specification

  • Description

    The ABRITES Vehicle Diagnostics Interface (AVDI) is the latest version of our interface that allows the connection between our state-of-the-art software and your vehicles. The AVDI is the basis upon which the whole ABRITES products ecosystem is founded. On this basis you can build a bespoke package of solutions tailored to your needs. The basic package will give you access to a vast array of functionalities that will allow you to enter the world of automotive diagnostics with a minimal investment. Additional purchases will allow you to cover a range of functionalities that is often unmatched by OEM tools.


    Each AVDI includes an Annual Maintenance Subscription (AMS) for the first year of ownership. In order to make sure that you get the full AVDI experience straight away. AMS allows receiving the latest updates on the AVDI diagnostic software as well as access to online services.


    The Support Plan Service (SPS) guarantees swift and effective technical support from our team of experienced professionals and needs to be purchased separately. 


    Furthermore, you will be able to perform basic diagnostics to all supported brands - Audi, Volkswagen, Seat, Skoda, Bentley, Lamborghini, BMW, MINI, Rolls Royce, Renault, Dacia, Mercedes-Benz, SMART, Mitsubishi, GM, Peugeot, Citroen, Opel/Vauxhall, Porsche, Honda, Ford, Mazda, Jaguar, Land Rover, Toyota, Lexus, Volvo, FIAT, Alfa Romeo, Lancia, Jeep, Subaru, Nissan, Infiniti, Chrysler, Dodge, Kia, Hyundai, Suzuki, Daihatsu, DAF, Aprilia, BMW, Bombardier Recreational Products and others.


    The basic diagnostics that can be performed to all brands listed above are as follows:

    • Complete vehicle scan
    • Module identification – see all modules in the vehicle, complete with VIN and part numbers (where applicable)
    • Reading and clearing diagnostic trouble codes (DTCs)
    • Live data display – see live data from the sensors in the vehicle in real time
    • Actuator testing – identify any possible issues in the car by performing actuator tests

    What’s more, all owners of AVDI receive the PassThru driver, which is an invaluable tool allowing you to work with original equipment manufacturer software (OEM), when necessary as well as a vast array of special functions allowing them to get the full experience of our products straight away. You can find details of those by brand listed below.


    The J2534 PassThru driver is compatible with the international SAE standards, and emulates different interface units in order to access 3rd party software products. This means, that you can access original equipment manufacturer products and work with them via AVDI, no need for additional tools. It saves time and expenses, leaving you and your customers happy.


    PASSTHRU COMPATIBILITY

    BMW - DIS over K-line and CAN bus

    BMW - E-Sys, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus

    BMW Rheingold ISTA-P

    BMW  

    MINI    

    Bombardier diagnostic software

    Mercedes DAS/Xentry - Star Diagnosis

    Mercedes    

    Evinrude Diagnostics

    Fiat EXAMINER

    FCA  

    Ford Scanner

    FORD  

    GM - Tech2Win, GDS2 and SPS diagnostic software

    GM  

    Honda/Acura HDS

    HONDA    

    Hyundai/KIA GDS

    HYUNDAI  

    KIA    

    Jaguar Land Rover Symptom Driven Diagnostics (JLR SDD)

    JAGUAR    

    LAND ROVER

    Mitsubishi MUT3

    Nissan Consult III+

    NISSAN  

    Land Rover/Jaguar IDS

    Subaru Select Monitor III

    SUBARU  

    Suzuki/Yamaha Marine Diagnostics

    Toyota/Lexus/Scion Techstream

    TOYOTA    

    LEXUS 

    Volvo VIDA

    VOLVO  

    VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS

    VW    

    AUDI  

    SKODA  

    SEAT  

    BENTLEY    

    LAMBORGHINI    

    Webasto TT

    VCI emulator which enables AVDI to emulate different interface units (e.g. K-line interface and ELM327 interface)


    VAG

    Complete vehicle diagnostic scan

    Read and clear diagnostic trouble codes (DTC)

    Display live values from the modules of the vehicle

    Perform Input/Output actuator tests

    Enable and disable actuators

    Access and perform Basic Settings

    Calibrations (e.g. steering angle calibration)

    Scan all units or separate one, access scan reports in a printable format

    Diagnostic channel adaptations

    Key programming by channel if the PIN is known


    Guided functions for ECU, Instrument cluster, Navigation, Steering wheel, Electronic parking brake, Telephone, Comfort module and Body Control Module


    Enable video in motion for MMI 2G and 3G


    Steering lock adaptation


    7-digit to 4-digit PIN conversion

    DPF remove by DUMP – EDC16 (checksum needed), EDC17

    Key programming, mileage calibration and module replacement in VAG Immo III and III+ vehicles


    BMW

    Reading and clearing DTCs

    Full guide during the DTC procedures

    Live data monitoring from multiple modules at the same time with multiple actuator activation

    Actuator testing for all electronic modules

    Generate/save/write complete Vehicle Order


    Key learning if required security data (ISN) is present (ZN002 or ZN003 PROTAG V2 is required)

    EWS1/EWS2 key programming by EWS dump, using the ZN002 or ZN003 PROTAG V2 

    EWS3 key programming using the ZN055 ABPROG EWS3 adapter and the ABPROG

    CAS1/CAS2/CAS3/CAS3+/BDC key programming completely by OBDII(ZN002 or ZN003 PROTAG V2 is required)


    Disable transport mode


    Change DME/DDE ISN

    Disable /enable keys

    Guided functions:

    - Entering and exiting transport mode

    - Service interval reset

    - DPF Replacement

    - DPF Regeneration

    - Reset FRM short circuit

    - Smooth running DME/ DDE setup

    - EGS adaptation reset for ZF 8HP and 6HP

    - Enabling parking brake workshop mode

    - Injector calibration

    - Starting Torque adjustment


    RENAULT/DACIA

    Reading and clearing of diagnostic trouble codes (DTCs)

    Displaying of actual values (either numerically or graphically)

    Actuator testing - ALL actuators can be tested separately.

    Advanced – view and edit various configuration parameters

    Scan report

    Key programming for all vehicles up to 2014 (including Clio IV)


    Key programming for the SMART 453/ Renault Twingo III


    Module adaptation by VIN change


    Change Radio code

    Scan report


    Advanced diagnostic – up to x95 (off line) ; up to Clio5 (on line)


        - Factory level coding

        - Change language

        - Dongle reset

        - many more


    MERCEDES-BENZ/MAYBACH/SMART

    Read and clear diagnostic trouble codes (DTCs)

    Monitor live values

    Perform actuator tests

    SCN coding (e.g. DPF regeneration)

    Service interval resets both for Assyst and Assyst Plus for most current models

    Vehicle Identification

    Module scanning

    Custom session


    Smart

    -    SOFTOUCH activation - switching from semi-automatic to automatic transmission

    - Key programming – models 450, 451, 452, 454 (All Keys Lost and duplicate key programming) ​

    - Key programming for the SMART 453/ Renault Twingo III (Duplicate key programming for Smart 453 and Twingo III. The process in the basic package is slower and different than the one in RR019 license. With RR019, you can perform all keys lost and duplicate key programming, which is much faster than the one procedure in the basic package.)

    -    Emergency start – models 451, 454

    -    Mileage calibration – both SAM module and instrument cluster

    -    Gearbox adaptation

    -    Cruise control activation

    -    Reflashing and renewal of SAM module and SAM/ECM synchronisation


    Mercedes-Benz

    -  Mercedes-Benz eVito Speed Limit Calibration 

    - Key programming by dump (DAS 2/2a/2b/ DAS 3)

    -    Cluster calibration and adaptation for vehicles up to 2014

    -    SCN coding completely by OBDII (no Xentry online account is required)

    -    CPC modifications by OBDII:

          VMAX limiter removal

          Exhaust flaps adjustment

          Torque limiter adjustment

    -    SBC counter reset

    -    Enable Video in Motion

    -    Clear crash data from Bosch/Temic/TRW airbags up to 2010

     


    MERCEDES-BENZ  TRUCK RANGE

    Module scanning

    Module Identification

    Reading and clearing diagnostic fault codes

    Live data monitoring


    MITSUBISHI

    Reading identification data

    Reading and clearing fault codes DTCs (description of DTCs is available in multiple languages)

    Scanning for available control units

    Coding and adaptations

    Displaying actual values (measured parameters)

    Reading and programming flash Engine Control Units and output tests.

    The following functionalities are also included in the online version of the software:

    Full module identification

    Connecting to the electronic modules

    Reading of EDC15 engine control units (ECU)


    PSA

    Reading and clearing of Diagnostic Trouble Codes (DTCs)

    Live values monitoring from all electronic modules and sensors using graph and table view

    Actuator testing

    Module identification

    Change ID in BSI, Telematics, Airbag, MDS

    Clear crash data in some Airbag modules by DUMP (offline)

    Change VIN in the BSI (does not include 2015+ Continental and 2016+ Delphi BSIs), Telematic/Radio, Airbag

    Change PIN in the BSI and make the BSI virgin (current PIN must be known)

    Key learning to all models if the PIN is known

    Change Mode (customer/showroom) BSI 2015+

    BSI backup/restore all config

    BSI view/clear faults log (via ABRITES Diagnostics for PSA offline) and history logs

    BSI service reset (via ABRITES Diagnostics for PSA offline)

    Set PIN ELV in BSI (via ABRITES Diagnostics for PSA offline)

    Verify/Set PIN in the Hands Free module in the BSI (via ABRITES Diagnostics for PSA offline)

    Emergency start if the PIN is known for vehicles with mechanical key (via ABRITES Diagnostics for PSA offline)


    PORSCHE

    Module identification

    Read/Clear DTCs

    Live data display

    Actuator testing

    Key programming for Porsche models after 2010 - spare key and All Keys Lost (ZN002 or ZN003 PROTAG V2 is required)

    Coding options

    Adaptation channels


    HONDA

    Module scanning - information on DTCs, Live Data (if available) and extended module identification

    Vehicle identification - automatic vehicle model detection

    Reading and clearing diagnostic trouble codes - shown in each module

    Key programming for all vehicles up to 2022:

    Spare key programming and All Keys Lost


    TOYOTA/ LEXUS/ SCION

    Module Identification

    Scanning for Diagnostic Trouble Codes (DTCs)

    Clearing DTCs

    Live Data monitoring

    Actuator tests

    Coding functions

    Electronic module special functions

    Key programming for all vehicles produced up to 2018 (G-type keys (mechanical and smart keys) and H-type keys (only smart keys)

    Key identification and cloning

    Reset and subsequent reuse of smart keys (ZN002 or ZN003 PROTAG V2 is required)


    VOLVO

    Reading of identification data from all electronic control units

    Reading and clearing DTCs

    Display of actual values/live data

    Service functions such as:

    - Service reset

    - Reset cylinder adaptations

    - No speed limiter

    - Change mode (normal, factory, transport, safety)

    - And many more

    Read Central Car Configuration


    CHRYSLER/ DODGE/ JEEP

    Reading and clearing of diagnostic trouble codes

    Module detection

    Module identification

    Extended ID

    Live data monitoring

    Actuator testing

    Scanning

    Read/write Data Flash and Program Flash for EDC15C2 and EDC16CP31 ECUs


    KIA/ HYUNDAI

    Full vehicle scan

    Module identification

    Reading and clearing of diagnostic trouble codes - with detailed information about the codes

    Live data display

    Actuator testing

    Read the PIN Code from EDC15 and Kefico ECUs by dump

    Instrument cluster calibration for instrument clusters with 93c56 EEPROM (2004-2008) - Accent, Vera Cruz, H1…

    PIN code reading from a working key for all vehicles with mechanical keys and DST AES,  DST 80, or HITAG 2 transponders

    PIN code reading for vehicles with an ECU with built-in immobilizer from the following brands: Kefico, Bosch EDC15/EDC16/EDC17, Delphi.

    PIN by VIN calculator for ALL vehicles up to year 09.2007

    Transmitter codes saving for ALL vehicles with mechanical keys


    FORD

    Reading and clearing of DTCs

    Module identification

    Extended module identification

    Service interval reset

    Actuator tests

    Measured values

    Airbag clear crash data and renew - RCM module with the following processor: XC23xx data flash for FORD/Mazda/JLR and Volvo, as well as TMS470 + EEPROM 25320/25640 for Ford/JLR


    FIAT CHRYSLER AUTOMOBILES

    Key programming by diagnostic (including remote control)

    BCM memory reading/programming by diagnostic

    Ability for key preparation key by dump of BCM using ABRITES ProTag ProgrammeR

    Supported models included in the basic AVDI diagnostic software:

    Fiat: Stilo, Punto, Palio, Idea, 500, 500L, 500X (metal bladed keys), Doblo, Qubo, Fiorino, Ducato (up to 2019), Panda

    Alfa Romeo: 147, GT, MiTo, Giulietta, 159, Brera

    Jeep: Compass, Grand Cherokee, Wrangler (up to 2019)

    Dodge: Challenger, Charger, Viper, RAM (up to 2019),

    Ferrari: 612, FF, 599, F12, 458, California (metal bladed keys)


    JAGUAR AND LAND ROVER

    Module scanning

    Reading and clearing diagnostic trouble codes for all modules,

    Service functions

    Spare key programming

    ALL KEYS LOST key programming

    Remote control and keyless programming

    for vehicles up to 2018!

    Mileage calibration for models up to 2014


    GENERAL MOTORS

    Reading identification of modules

    Reading/clearing fault codes

    Scanning for devices

    Data display

    Measured values

    Security code programming and vehicle identification number (VIN) programming


    SUZUKI

    Module identification

    Reading and clearing diagnostic trouble codes

    Live data monitoring

    Actuator tests

    Key programming


    SUBARU

    Scan for units

    Module identification

    Read and clear diagnostic trouble codes

    Temporary Diagnostic codes display

    Memorized Diagnostic codes display

    Current data display

    Clear crash data

    Monitor live data


    TESLA

    Scan the vehicle for all available electronic modules

    Read and clear their respective DTCs (diagnostic trouble codes)

    View live data 

    Service functions:

      - Entering the parking brake in service mode

      - IBST VIN learn and reset

      - Test pedal offset

      - Dim central, left or right mirrors

      - Head Lamp communication test

      - HOMELINK communication test

      - Window calibration on all doors

      - NFC amplitude reading and many more


    J1939-COMPLIANT VEHICLES

    Module scanning

    Reading diagnostic trouble codes in each module

    Clearing diagnostic trouble codes

    Monitoring live values

    Freeze frame


    On top of all the free functionality, there are many options that can be purchased separately giving access to a wide range of opportunities for every professional. These functionalities are available as software special functions available in our online shop and include:


    -    Key programming – add a spare key or program keys in All Keys Lost situations

    -   Module replacement – perform parts exchange, module renewal, module adaptation

    -    PIN code reading – get information vital for key programming and module adaptation

    -    Component security bytes reading – read bytes in order to adapt modules and learn keys

    -   Cluster calibration – access the instrument cluster data

    -   Engine Control Unit (ECU) programming – update the software to apply custom settings


    AVDI is unrivalled in giving you the opportunity to work with nearly 100 % of the vehicles around the world, and OEM tools, as well. It is a tool unmatched in versatility, coverage and functionality. Get your AVDI now, and achieve the impossible!

  • Compatibility

    AVDI is compatible with all Abrites diagnostic software:

    • Bikes, Snowmobiles, Water scooters, Heavy duty vehicles
    • BMW, Mini
    • Chrysler, Jeep, Dodge
    • DAF
    • Daihatsu
    • FCA - Fiat, Alfa Romeo, Lancia
    • Ford, Mazda
    • Hyundai, KIA
    • Jaguar, Land Rover
    • Mercedes, Smart, Maybach
    • Mitsubishi
    • Nissan, Infiniti
    • Opel, Vauxhall
    • Peugeot, Citroen
    • Renault, Dacia
    • Subaru
    • Suzuki
    • Tesla
    • Toyota, Lexus, Scion
    • VAG - Volkswagen, Audi, Seat, Skoda, Porsche
    • Volvo
    • SAE J2534 PassThru compliant driver:
    • Compatible with many 3rd party diagnostic software
    • VCI emulator which enables AVDI to emulate different interface units (e.g. K-line interface and ELM327 interface)
    • J2534 PassThru compatibility:
    • BMW - DIS over K-line and CAN bus
    • BMW - E-Sys, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus
    • BMW Rheingold ISTA-P
    • BMW  
    • MINI    
    • Bombardier diagnostic software
    • Mercedes DAS/Xentry - Star Diagnosis
    • Mercedes    
    • Evinrude Diagnostics
    • Fiat EXAMINER
    • FCA  
    • Ford Scanner
    • FORD  
    • GM - Tech2Win, GDS2 and SPS diagnostic software
    • GM  
    • Honda/Acura HDS
    • HONDA    
    • Hyundai/KIA GDS
    • HYUNDAI  
    • KIA    
    • Jaguar Land Rover Symptom Driven Diagnostics (JLR SDD)
    • JAGUAR    
    • LAND ROVER    
    • Mitsubishi MUT3
    • Nissan Consult III+
    • NISSAN  
    • Land Rover/Jaguar IDS
    • Subaru Select Monitor III
    • SUBARU  
    • Suzuki/Yamaha Marine Diagnostics
    • Toyota/Lexus/Scion Techstream
    • TOYOTA    
    • LEXUS  
    • Volvo VIDA
    • VOLVO  
    • VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS
    • VW    
    • AUDI  
    • SKODA  
    • SEAT  
    • BENTLEY    
    • LAMBORGHINI    
    • Webasto TT
    • VCI emulator which enables AVDI to emulate different interface units (e.g. K-line interface and ELM327 interface)

    • Supporting external communication link with our transponder programmer - ZN003 PROTAG V2
    • Supporting external communication link with our IC programmer - ABPROG
    • TÜV Rheinland certified
    • GS certified
    • Compliant with the following European Directives:
    • 2004/108 / EC
    • 2006/95 / EC
    • 2011/65 / EU
    • 2012/19 / EU
    • And meets the following safety norms: EN61010-1: 2010, EN61326-1: 2013.
  • Technical Specification

    • Dimensions:
    • 13x5x25 cm
    • Weight:
    • 0,6 kg
    • K-line ISO 9141 (100 mA) multiplexed to 24 different pins of the diagnostic connector
    • ISO14230 compliant
    • SAE J1850 VPW, PWM compliant (additional adapter required)
    • Single wire CAN bus multiplexed to different pins of diagnostic connector
    • Dual wire low speed CAN bus multiplexed to different pins of diagnostic connector
    • Dual wire high speed CAN bus multiplexed to different pins of diagnostic connector
    • CAN bus GMLAN,  ISO14229, ISO15765, J1939, ISO22901 compliant
    • Analog Input USB interface to the PC Supply voltage 8..30V DC OBDII cable
    • Updatable firmware

    FULL LIST OF BASIC AVDI FUNCTIONALITIES:


    BUDS

    BR002 - VCINPL B.U.D.S


    CHRYSLER

    CR007 - Engine Control Unit Flash Manager

    Read/write Data Flash and Program Flash for EDC15C2 and EDC16CP31 ECUs


    FIAT

    FN007 - Transponder Maker

    FN008 - Key Learning

    FN011 - BCM Read/Update

    FN012 - BCM and Key Manager

    FN017 - PIN and Key Manager for FCA vehicles


    FORD

    FR009 – Airbag

    Airbag clear crash data and renew - RCM module with the following processor: XC23xx data flash for FORD/Mazda/JLR and Volvo, as well as TMS470 + EEPROM 25320/25640 for Ford/JLR


    JLR

    JL002 - Key Learning

    JL003 - Cluster Calibration

    JL004 - Key Learning (DPLA, FK72, HPLA)


    MERCEDES/MAYBACH/SMART

    Mercedes Online- CPC modifications by OBDII - VMAX limiter removal/ Exhaust flaps adjustment/ Torque limiter adjustment

    SCN coding completely by OBDII by using Mercedes Online (no Xentry online account is required)


    MN002 - Cluster Calibration by OBD (K-Line), Assyst Plus ( Mileage calibration – both SAM module and instrument cluster)

    MN003 – Airbag (Clear crash data from Bosch/Temic/TRW airbags up to 2010)

    MN004 - TV/AUX, Seatbelt, Reverse warning, Gulf states (Enable Video in Motion – either by using Mercedes Offline or Mercedes Online)

    MN005 - Key Programming, Immo read/update (Key programming by dump (DAS 2/2a/2b)

    MN006 - ECU Read/Update Flash

    MN007 - CGW (Central Gateway) Read/Update ConfData (SOFTOUCH activation - switching from semi-automatic to automatic transmission), Gearbox adaptation

    MN008 - SMART Key Learning, Emergency start – models 451, 454 ( Key programming – models 450, 451, 452, 454 ), Cruise control activation

    MN009 - Cluster Calibration for SMART after 2007

    MN010 - Cluster Calibration for S-Class W221/CL W216 and Sprinter, Vito, Viano (after 2006)

    MN011 - CAN Dash Cluster Calibration - W211, W219, W164, W251, W203...

    MN012 - Cluster Calibration - Mercedes, Smart

    MN013 – Airbag – clear crash data

    MN014 - Cluster Calibration in Dash in SMART 2007+ and in SAM module (451)

    MN015 - Cluster Calibration - Mercedes

    MN016 - Cluster Calibration for W204/W212/W207/W197/X204/w218

    MN017 - Cluster Calibration for W220/W215; Read/Update ConfData of W220/W215/W169/W245/W221/W216 (Reflashing and renewal of SAM module and SAM/ECM synchronisation), Cluster calibration and adaptation for vehicles up to 2014

    MN018 - Key Learning (DAS2, DAS2A, DAS2B, DAS3), Virgin ECU, SBC Repair (SBC counter reset), Repair Start Error

    MN019 - Electronic Transmission Control (722.9) and ISM renew ( 7-G Tronic Databse for TCU reflashing)

    MN020 - Instrument Cluster Data Manager ( Mileage calibration )

    MN021 – TV (TV In Motion), ECU, Airbag Manager

    MN028 - Instrument Cluster Data Manager, TV (TV In Motion), ECU, Airbag Manager


    MITSUBISHI

    MI003 - ECU Read/Update Flash - Reading of EDC15 engine control units (ECU)

    MI005 - Electronic Control Unit reprogramming ( EDC15 engine control units (ECU) reprogramming)


    OPEL

    ON007 - Tech2Win Driver


    RENAULT

    RR002 - Key learning

    RR003 - ClioIII, Modus, MasterIII, Logan, Traffic

    RR005 - Key learning

    RR006 - Megane III key learning

    RR007 - Updated SW key learning

    RR008 - Clio IV key learning

    RR010 - Clio IV key learning

    RR012 - Twingo III key learning

    RR015 - Smart 453 key learning


    TOYOTA

    TN004 - Key Programming

    TN005 - Advanced diagnostic functionality. Key programming (Immo Box – mechanical keys – requires ZN039-2)

    TN006 - Advanced key programming by diagnostics (Smart Key programming – requires ZN039-2)

    TN007 - Advanced diagnostic functionality and key programming (Smart Keys programming for models up to 2016/2017)


    VAG

    AN002 - Cluster CAN - Calibration

    AN003 - Cluster PIN-CAN - Calibration

    AN004 - Immo panel – Read PIN

    AN005 - Immo panel EDC16 - Read PIN&CS

    AN006 - Cluster K-Line - Calibration

    AN007 - ECU ConfData – Read ECU EEPROM

    AN008 - Flash Counters

    AN010 - Airbag ConfData – Airbag reset

    AN011 - TV Configuration – TV in motion

    AN012 - EDC16 calibration – mileage in ECU

    AN014 - EDC17 PIN – Read Immo Data PIN&CS from ECU

    AN015 - Flash Memory ECU – by OBD

    AN018 - Dealer key learning Q7- spare key (2006 - 2008)

    AN019 - Prepare Dealer Key Q7 – spare key (2006 - 2008)

    AN021 - ME7 ConfData – read and write ECU EEPROM all by OBD

    AN023 - VW Crafter – Read/Write ECU ConfData, Key learning, ECU and Immobilizer Diagnotics, Remote Control Diagnostic, ECU ConfData in Direct Mode, ECU Adaptation (Autodetect/Manually enter ECU PIN/CS)

    AN024 - Key learning for EDC16 models – If PIN and CS are known

    AN025 - EDC16/MED9/Simos PIN/CS – Read Immo Data

    AN026 - Dealer key learning

    AN027 - Q7 2008+

    AN028 - Cluster CAN UDS

    AN029 - IMMO Data Immobiliser/ECU

    AN030 - Key Adaptation (All VAG Models)

    AN031 - Dealer Key Preparation – Models up to 2012

    AN032 - Security code by CAN

    AN033 - ECU ConfData (EDC15, ME7.x.x) – Read ECU EEPROM by OBD

    AN034 - Cluster - PIN/Calibration – K-Line – Mileage for all Models up to MY 2006

    AN036 - Airbag (K-Line/CAN) – Airbag reset for models up to MY 2008


    Other functionalities already included in AVDI Base for VAG:


    - Diagnostic channel adaptations

    - Key programming by channel if the PIN is known (done in diagnostics in Instrument Cluster)

    - Guided functions for ECU, Instrument cluster, Navigation, Steering wheel, Electronic parking brake, Telephone, Comfort module and Body Control Module (enable/disable)

    - Enable video in motion for MMI 2G and 3G

    - Steering lock adaptation (done in diagnostics on a separate channel)

    - 7-digit to 4-digit PIN conversion

    - DPF remove by DUMP – EDC16 (checksum needed), EDC17

    - Key Programming, Mileage Calibration and module replacement for all VAG Immo III and III+ vehicles

  • User Manual

SHOP AVDI
Share by: