PN020- PIN Manager (BSI and Engine Control Unit)

The PIN Manager allows you to read the PIN code from the BSI or ECU units and use it to program keys for Peugeot and Citroen vehicles, manufactured after 2016.

Functionalities:

• PIN code reading
• Key programming (HT-AES)
• Emergency start

The PIN code is retrieved by using the ZN094 key emulator, which can consequently be used for emergency start in All Keys Lost situations, in order to start and drive the vehicle to the nearest workshop.
For vehicles 2021+ with BSI the PIN is read directly in seconds even in a case of All Keys Lost It is no longer necessary to read the BSI EEPROM or to read the PIN from the Engine Control Unit!
For vehicles 2022+ with VSM the PIN is read directly in seconds, but a working key is required or VSM EEPROM dump in a case of All Keys Lost.
The new procedure is a much faster, easier and safer solution!

Note: Retrieving the PIN by ZN094 emulator does not bypass 30 minutes waiting time when learning a new key.

PN018 legacy license (now included in PN020)

The PN018 PIN Manager is a leader in the aftermarket solutions for key and remote control programming for the Peugeot/Citroën PSA vehicle range. Abrites is always one step ahead in terms of PIN code reading and key/remote control programming, covering the whole range of vehicles. PN018 lets you read the PIN code from all BSI types, and program keys, all by OBDII, as well as skip wait mode for models 2018+.

More functionalities:

• BSI Exchange- allows you to read the whole content of the one BSI and transfer it to another one. You will need to own both special function PN018 and PN017 to complete this procedure. (all BSI units)
• ECU Replacement- in case of ECU replacement, you can replace the defected ECU with a second-hand ECU, read its PIN (preferably on bench using CB013 ) and change the BSI PIN to match the replacement's ECU PIN. Then, a new set of keys need to be programmed to the vehicle.

The following BSI platforms are supported:

• Siemens K-Line
• Siemens CAN
• Johnson Controls CAN (including 2015+ with SPC microcontroller)
• Valeo CAN
• Continental UDS (including 2015+ locked)
• Valeo UDS
• Delphi CAN (Latin America)
• Delphi UDS

Supported models for PIN code reading:

• PEUGEOT
  

3008 II Hybrid
Expert
208E
208 II
308 II
308 III
508 II
2008 II
3008 II
5008 II
Partner III

• CITROËN

C5 Aircross
C3 III
C3 Picasso
C3 Aircross
C4 III
C4 Cactus
C4 Picasso II
C4 Aircross
C5 Aircross
Berlingo III
Partner

• DS

DS 3
DS 3 Crossback
DS 4
DS 4 II
DS 5LS
DS 5
DS 6
DS 7 Crossback

• Toyota

ProAce 2016+

• Lancia

Phedra 2008+

• Opel/Vauxhall

Astra L
Crossland
Corsa F
Combo E
Grandland
Mokka
Vivaro

• Fiat

Scudo 2022+
Ulysse 2022+

• Jeep

Avenger

New AVDI Interface or activate AMS is required to purchase this special functions.

ABRITES USA USER MANUALS

ABRITES USA VIDEOS

Please enter AVDI# in the notes section when checking out. This is required to complete the order processing.

The normal turnaround time for software link processing, is 1-2 business days.

ALL SOFTWARE SALES FINAL!

User of these products accepts full legal responsibilities for proper usage. These products are intended for legal use only. ABRITES USA does not condone or accept any responsibility for misuse of it's products.

Thank you.

ABRITES USA